Eagerled X-01 LED front maintenance tool magic tool instruction
Eagerled X-01 LED front maintenance tool magic tool instruction Product appearance display:
2.Excellent ergonomic design for easier use;
3.Unique air duct design for better heat dissipation and longer motor life;
4.Unique anti-static design to protect module security;
5.User-friendly of backpack design, safer work at height;
6.Optimized design, stronger power and lower noise.
Eagerled X-01 LED front maintenance tool magic tool instruction Tool parameter：
1.Charger charging voltage: 100-240V
2.Charger output voltage: 25.2V
3.Lithium battery energy:43.2Wh
4.Maximum continuous charging current: 25.2V-1A
5.Continuous discharge duration: 12MIN(This data is laboratory data, 6.change according to the use environment, data will fluctuate)
7.Working environment: -20-45℃ 15%-85%RH
Eagerled X-01 LED front maintenance tool magic tool instruction Use operating instruction：
Open the main switch, hand the tool handle, and then put the suction cup at the center of the module, tap the touch switch button, gently pull the module out smoothly, the other hand holds the module steady, touch the touch switch button to turn off the motor, then turn off the main switch. (remark: after open the main switch, if the battery indicator is green means that it is full power status, if yellow means power 25-75% status, if red means power below 25% status.)
Remark: if no need use the tool for a long time, please charge before storage, and chargingregularly, keep the battery full power state.
Eagerled X-01 LED front maintenance tool magic tool instruction Charging instruction:
Plug the charger into the socket, DC end insert into the charging stand, open the main switch, check the charge status through the battery indicator, after being fully charged, turn off the main switch,pull out the charger.
