HUB121 LED Panel HUB Card Overview
The HUB121 LED Panel HUB Card is an interface board for an LED panel assembly. The board photo shows a blue PCB marked hub121, with eight shrouded connectors across the component side and long connection rows along its upper and lower edges.
The 16-pin reference below retains the product’s listed signal positions. Use the complete HUB121 model marking, connector arrangement and interface definition when comparing a card for an existing installation.
16-Pin Signal Reference
Read the odd and even pin columns together. The table includes the RD, GD and BD labels as well as CLK, LAT, OE, A and GND; matching only the connector shape is insufficient for selection.
| Pin extraño | Signal | Pin par | Signal |
|---|---|---|---|
| 1 | RD1 | 2 | RD2 |
| 3 | GD1 | 4 | BD1 |
| 5 | RD3 | 6 | RD4 |
| 7 | GD2 | 8 | BD2 |
| 9 | CLK | 10 | GND |
| 11 | LAT | 12 | GND |
| 13 | OE | 14 | GND |
| 15 | A | 16 | GND |
HUB121 Board Photo

Details for a Replacement Enquiry
- Send clear front and rear photos of the existing board, including model and version markings.
- Show the cable orientation and any pin-1 indicators at the connection.
- Provide the receiving-card or controller model and LED module information.
- Include the quantity and delivery destination when requesting a quotation.
Board dimensions and electrical operating ratings are not specified in the current product information. Ask the team to confirm the details needed for the supplied unit and your installation.
Preguntas frecuentes
Which pin is labelled A on the HUB121 interface?
The original interface table lists A at pin 15 and GND at pin 16. Verify the full 16-pin order and the cable orientation against the existing assembly before connection.
What signal labels are listed for HUB121?
The table lists RD1 to RD4, GD1 and GD2, BD1 and BD2, plus CLK, LAT, OE, A and GND. These labels are presented in their original pin positions and should be compared as a complete interface.
Is a similar HUB card model enough to identify a replacement?
Use the full HUB121 model marking, the board layout and the signal order. Send front and rear photos, cable orientation, receiving-card or controller model and LED module details so the required connection can be checked.
Pedidos y soporte posventa
Use the existing purchase controls above, or request an interface check before ordering. Review the store’s Taxes, Shipping & Returns tab for policy information and contact the team about order-specific shipping, tax, return or after-sales questions.


Testimonios
No hay comentarios aún.