An LED screen module is the replaceable board that carries the pixels and their driver circuits. Several modules fit into a cabinet. That construction lets you build a display to a specific pixel size and service a damaged area without replacing the whole cabinet.
1. How module size determines screen resolution
Start with the pixel dimensions printed on the module specification. A module that measures 320 × 160 mm at a 2.5 mm pixel pitch has 128 × 64 pixels. Eight of these modules across and four high make a 1,024 × 256-pixel canvas. Give the content designer those pixel dimensions so small lettering can be checked at its intended size.
2. Choosing between rigid and flexible modules
A flat video wall usually has rigid modules that register against a flat cabinet face. For a curved fascia or column, ask for the permitted bend direction and minimum radius of the specific flexible module. Check the curve at the seams on a drawing or sample before the frame is built. Service access also matters: the technician needs room to remove a module and reach its connections.
3. What to match when ordering a spare
| Vérifiez | Que comparer |
|---|---|
| ajustement mécanique | Board dimensions, fixing points, connector position and cabinet access. |
| disposition des pixels | Pixel pitch and pixel count across and down. Two boards can share a pitch and still have different dimensions. |
| Compatibilité électrique | Supply voltage, connector pinout, driver IC, scan configuration and receiving-card settings. |
| lustrée | Compare a sample with the surrounding area at normal brightness, on white, gray and solid colors. |
Photograph the rear label and board revision before ordering. A spare from the original production batch is a useful starting point for color matching. Test it with the cabinet configuration before returning the screen to service.
4. Conclusion
For a new wall, specify the required pixel canvas and cabinet layout together. For a repair, the most useful evidence is the original module label, mounting pattern, configuration and a photo of the fault.
5. Questions fréquentes
(1) Can I replace just one LED module?
Often, yes. If diagnostics trace the fault to one board, a compatible spare can be fitted at that position. A fault affecting several adjacent modules may also involve their shared power or data path.
(2) Will any module with the same pixel pitch fit?
Pixel pitch describes the spacing between pixels. Compare the board size, mounting points, connector pinout and drive configuration before ordering.
(3) Can a flexible LED module wrap around any column?
Measure the column radius at the module mounting surface and check it against the specified bend radius and direction. Allow space for the joints and for removing a panel later.

