MDA400PC4.2+3.2 LED Display Power Supply
这 Rong-Electric MDA400PC4.2+3.2 is a dual-output power supply for common-cathode LED displays. The retained V1.0 manufacturer PDF, dated 2021-10-28, lists separate 4.2V and 3.2V output channels. The data below is attributed to that document.
技術規格
| 參數 | 規格 |
|---|---|
| 型號 | MDA400PC4.2+3.2 |
| Output power in PDF main electrical table | 343W |
| V1 rated output / current range | +4.2Vdc / 0–55A |
| V2 rated output / current range | +3.2Vdc / 0–35A |
| Rated input voltage in PDF | 100–240伏特交流電 |
| PDF 中的輸入電壓範圍 | 90–264伏特交流電 |
| 輸入頻率 | 47–63赫茲 |
| Cold-start efficiency | 在 220Vac、滿載和室溫條件下,效率≥88%。 |
| 功率因數 | 滿載時≥0.95 |
| 散熱 | Ventilation cooling; follow the PDF aluminium-baseplate installation requirements |
| 尺寸(長×寬×高) | 180 × 68 × 26mm; dimensional tolerance about ±1mm |
選用與安裝
Confirm both voltage rails and their individual load currents against the LED module design. Follow the PDF channel-specific protection behavior, terminal definitions and derating curves. Its installation section requires thermal contact with an aluminium plate or equivalent enclosure arrangement; review those instructions before mounting.
常見問題
1. Is MDA400PC4.2+3.2 a dual-output power supply?
Yes. The manufacturer PDF lists V1 at +4.2Vdc with 0–55A and V2 at +3.2Vdc with 0–35A.
2. Does the model name mean it is rated at 400W?
The retained manufacturer PDF main electrical table lists 343W. Do not substitute a wattage inferred from the model name.
3. Can the two output channels be treated as interchangeable?
No. They have different specified voltages and current ranges. Follow the PDF terminal definitions and match each rail to the LED module design.
4. Where can I check input and installation requirements?
The original PDF below lists its 100–240Vac rated input, 90–264Vac input range, derating curves and aluminium-baseplate mounting requirements. Confirm the supplied revision when ordering.




過去評論
尚未有評論。