HUB34 LED Display HUB Card Overview
The HUB34 LED Display Data Transport HUB Card is an interface board for an LED display assembly. The component-side photos show a blue board marked QP-HUB34(20)-V1.1, with six shrouded connectors and long connection rows along opposite edges.
Use the signal table to compare the interface first, then check the original front and rear photos against the board in your installation. Confirm the required model and version before placing an order.
Definición de interfaz de 20 pines
The paired columns retain every signal position from the product reference. Read each odd and even pin together: the R, G and B labels run through three numbered groups, while the A–D, CLK, LAT, OE and GND labels appear in the positions shown below.
| Pin extraño | Signal | Pin par | Signal |
|---|---|---|---|
| 1 | R1 | 2 | G1 |
| 3 | B1 | 4 | R2 |
| 5 | G2 | 6 | B2 |
| 7 | R3 | 8 | G3 |
| 9 | B3 | 10 | A |
| 11 | B | 12 | C |
| 13 | D | 14 | GND |
| 15 | CLK | 16 | GND |
| 17 | LAT | 18 | GND |
| 19 | OE | 20 | GND |
Original HUB34 Board Photos


Prepare a Replacement Enquiry
- Photograph both sides of the existing board and all model or revision markings.
- Show cable orientation and any pin-1 indicators.
- Provide the receiving-card or controller model and LED module details.
- Include the quantity and delivery destination for an order-specific quotation.
Dimensions and electrical operating ratings are not provided in the current product information. Contact the team to confirm any installation details needed for your application.
Preguntas frecuentes
Which signal groups are listed for HUB34?
The 20-pin reference lists R1/G1/B1, R2/G2/B2 and R3/G3/B3, followed by the A, B, C and D labels and the CLK, LAT, OE and GND positions. Compare the complete pin order with your existing board.
What board marking is visible in the HUB34 photos?
The component-side photos show QP-HUB34(20)-V1.1. Use the full marking and connector layout when comparing the photographed board with your installation; confirm the required supplied version before ordering.
What should I send for a HUB34 replacement check?
Send clear front and rear photos, the complete model and version marking, cable orientation, receiving-card or controller model and LED module details. Include the required quantity and delivery destination for a quotation.
Pedidos y soporte posventa
Use the existing purchase controls above, or ask for an interface check before ordering. Review the store’s Taxes, Shipping & Returns tab for policy information and contact the team about order-specific shipping, tax, returns or after-sales questions.




Testimonios
No hay comentarios aún.