Judge an advertising screen with the advertisement it will actually show. A saturated demonstration video can hide a missing pixel column, make a cabinet seam hard to see or give little indication of whether a customer can read a price from across the street.
1. Bring representative content to the demonstration
Use the final artwork, a fine border, a neutral grey image and a familiar photograph. Stand at the nearest and farthest intended viewing points. Read the smallest text and look at how the logo crosses cabinet joints. Confirm the image is displayed at the agreed aspect ratio.
2. Check both daytime and evening settings
Test visibility in the expected ambient light, including reflections from a shop window if the screen sits behind glass. Reduce brightness for the evening condition and inspect dark gradients and colour consistency across cabinets. A daytime-only demonstration leaves this part of the buying decision open.
3. Separate screen quality from controller specifications
The NovaStar MSD300 is a sending card. Its job is to deliver image data in a compatible control system. The LED modules, cabinet alignment, calibration and ambient light all affect what a viewer sees. For a Linsn-based system, identify the actual sending and receiving components in the same way.
Measure typical power use with the agreed content and brightness if operating cost is part of the quotation. Ask the supplier to identify the test conditions and the cabinet’s maximum electrical demand separately.
4. Record the acceptance result
Photograph the test patterns and write down the source timing, brightness setting and viewing position. Record visible defects and the agreed remedy before approving the screen. These notes also give service staff a comparison point when replacing a module later.
5. Perguntas frequentes
(1) What image makes uneven cabinets easy to see?
A uniform grey field at several brightness levels can reveal differences between adjacent modules. Use a fine grid or diagonal lines to inspect alignment as well.
(2) Is the brightest screen always the best for a shop window?
Check reflections and readability during the day, then check dimming and legibility after dark. The suitable range depends on the location and the content.
(3) How should I compare two vendors’ energy figures?
Ask for measurements at the same screen area, content and brightness. Also compare maximum electrical demand for the proposed installation.
6. Conclusão
Put a readable price, a clean cabinet seam and an acceptable evening image on the sign-off sheet. A screen that passes those tests has demonstrated the qualities that matter at the advertising site.

