HUB41A LED HUB Expansion Card Overview
The HUB41A LED HUB Expansion Card is an interface board for an LED display assembly. The original photo shows a blue board marked Hub41A, with eight shrouded connectors across the component side and long connection rows at the upper and lower edges.
The table below presents the existing listing’s 20-pin interface definition in a readable format. Use the signal positions and the original board photo as comparison references when enquiring about a replacement.
20針接口定義
Read each odd/even pin pair together. Check the complete signal sequence, rather than matching only the HUB card name or the shape of its connector.
| 奇怪的別針 | Signal | 甚至別針 | Signal |
|---|---|---|---|
| 1 | GD1 | 2 | GD2 |
| 3 | CLK | 4 | GND |
| 5 | 土地增值稅 | 6 | GND |
| 7 | RD1 | 8 | RD2 |
| 9 | D | 10 | GND |
| 11 | C | 12 | GND |
| 13 | B | 14 | GND |
| 15 | A | 16 | GND |
| 17 | OE | 18 | GND |
| 19 | BD1 | 20 | BD2 |
Original Board Photo

Information for a Replacement Check
- Record the printed model and any version marking on the board being replaced.
- Photograph both board sides and show the cable orientation at the connector.
- Provide the receiving-card or controller model and the LED module details.
- Confirm the quantity and delivery destination when requesting a quotation.
The original listing does not provide a downloadable specification, a board dimension drawing or electrical operating ratings. Ask the team to confirm those details for the supplied unit when they are needed for your installation.
常見問題
How many pins are listed for the HUB41A interface?
The original HUB41A interface definition lists 20 pins. Compare the full odd/even signal order with the existing assembly; the connector pin count alone does not establish compatibility.
Is another 20-pin HUB card automatically interchangeable?
No. The HUB41A table places GD1 and GD2 at pins 1 and 2, RD1 and RD2 at pins 7 and 8, and BD1 and BD2 at pins 19 and 20. Check every signal position and cable orientation before choosing a replacement.
What should I provide for a HUB41A enquiry?
Send the original board model, clear front and rear photos, connector orientation and cable markings. Include the receiving-card or controller model, LED module details and quantity so the required interface can be checked.
訂購、出貨和支持
Use the existing purchase controls above or request an interface check first. Review the store’s Taxes, Shipping & Returns tab for policy information. Contact the team for order-specific shipping, tax, return or after-sales questions.


過去評論
尚未有評論。