KYStar G608 LED receiving card
The KYStar G608 Gold Card Series receiver converts data from a sending device into LED module control signals. The product features specify eight standard module interfaces and 16 groups of RGB data.
Image adjustment and maintenance
The G608 supports point-by-point brightness and chromaticity correction with low-gray compensation. It is designed for compatible general-purpose, PWM and point-detection driver chips, and supports low-brightness grayscale display.
Configuration readback, one-click repair and real-time network/cable-sequence detection support servicing. Flexible pixel placement is available for special-shaped screen layouts. Check the actual module and connector configuration before using a replacement card.
Technical specifications
| Parameter | Specification |
|---|---|
| Module interfaces | 8 standard 16-pin interfaces in the feature/pinout sections |
| RGB data output | 16 groups |
| Network connections | 2 × Gigabit Ethernet; no fixed input/output distinction |
| Input voltage | 3.5–6 V |
| Working current | 0.6–1.0 A in the operating-current row |
| Operating temperature | −10–70°C |
| Operating humidity | 0–95% |
| Cascade quantity | Fewer than 200 receiving cards per network cable |
| Correction | Point-by-point brightness and chromaticity correction; low-gray compensation |
Pixel-load and connector notes
The linked V2.0 specification contains conflicting capacity figures: its feature list says 98K pixels, while its machine table lists 512 × 512 pixels. These values are not equivalent. Confirm the supported load for the exact card revision, module driver and scan configuration before sizing the screen.
The same PDF describes eight outputs in its feature and pinout sections but includes connector labels extending to twelve in another section. Use the physical card and verified connector drawing to confirm wiring.
Frequently asked questions
Does the G608 support 98K pixels or 512 × 512 pixels?
The linked PDF lists both values in different sections. They conflict, so this page does not select one as the confirmed maximum. Verify the exact hardware and module configuration before screen sizing.
How many RGB data groups does the G608 output?
The specification lists 16 RGB data groups and describes eight standard module interfaces.
Can either Ethernet port be used as an input?
Yes. The PDF states that the two Gigabit Ethernet ports have no fixed input/output distinction.
What functions help when replacing a G608?
Configuration readback, one-click repair and network/cable-sequence detection are supported. Check the model revision and connector wiring and retain the existing settings before replacement.

Download Specification:
Kystar G608 LED Display Screen Receiver Card Specification



Reviews
There are no reviews yet.