Huidu HD-K12 LED receiving card with onboard HUB75E
The HD-K12 supports synchronous and asynchronous LED control systems and 24 RGB parallel data groups. Its overview and interface description identify 12 onboard HUB75E ports for direct connection to matching modules.
Technical specifications
The table follows the linked V1.1 specification and keeps driver-dependent loading values separate.
| Module interfaces | 12 × HUB75E in overview and interface description; one parameter row says 8—see note |
|---|---|
| Parallel data | 24 RGB groups |
| Conventional / ShiXin LS chip load | 192 × 512 pixels |
| PWM chip load | 384 × 512 pixels |
| Scan mode | Static to 1/128; spot and null-point settings |
| Driver IC support | Conventional ICs and mainstream PWM ICs |
| Network / distance | 2 Gigabit Ethernet ports; specified network cable within 80 m |
| Power interfaces | 2 inputs: binding-post and keyed connector types |
| Working voltage / power | DC 3.8–5.5 V / 3 W |
| Grayscale | 256–65,536 |
| Working temperature | −25°C to 75°C |
| Working / storage humidity | 0–95% RH |
| Net weight | Approximately 91 g |
Document clarification: one PDF parameter row lists eight HUB75E interfaces, conflicting with the 12-port overview and interface description. The loading row also contains unclear wording about empty areas. Confirm the supplied card and layout rules before final configuration.
Screen setup and status checks
Cards can be arranged in any order, with smart settings used to match the physical screen wiring. The test key supports brightness-uniformity and module-flatness checks. RUN flashes during normal operation, and rapid LAN flashing indicates Gigabit recognition and incoming data.


HD-K12 frequently asked questions
Does HD-K12 have 12 or 8 HUB75E ports?
The V1.1 overview and numbered interface description both identify 12 HUB75E ports, while one parameter-table row says eight. This page follows the two model-specific descriptions and flags the conflicting row; confirm the supplied board if connector count is critical.
What pixel load does K12 support?
The specification lists 192 × 512 for conventional and ShiXin LS chips, and 384 × 512 for PWM chips. These are driver-dependent capacities. The accompanying English sentence about empty areas is unclear, so confirm how gaps and null points are counted for your layout.
Does the K12 require a separate HUB adapter?
No separate adapter board is required for matching HUB75E modules according to the overview. Check the module pinout, driver IC and scan mode before connection.
Can K12 work with synchronous and asynchronous LED systems?
Yes. The PDF lists dual-mode players, asynchronous sending cards, synchronous sending cards and two-in-one video processors. Verify the exact sending-device model and configuration.
What supply and operating temperature are specified?
The K12 is specified for DC 3.8–5.5 V, 3 W and a working temperature of −25°C to 75°C. Disconnect power before working on the card or module connections.


Reviews
There are no reviews yet.