Colorlight OP1 SC Fiber Optic Transceiver | 10 km
$ 46.00
Colorlight OP1 Ethernet-to-fiber transceiver with an SC single-mode optical connection, 10 km listed fiber distance and a 10/100/1000Base-T RJ45 port. Uses DC 5 V power and includes link-status indicators and DIP-switch controls.
2500 in stock
Colorlight OP1 Ethernet-to-fiber transceiver
The Colorlight OP1 converts Ethernet twisted-pair signals to optical Ethernet. Its SC single-mode fiber connection is specified for a 10 km transmission distance, with a 10/100/1000Base-T RJ45 port for copper Ethernet. The device uses DC 5 V power and provides indicators for link status, data activity, speed, duplex mode and power.
OP1 specifications
| Parameter | Specification |
|---|---|
| Optical interface | SC, 1000Base-X |
| Copper interface | RJ45, 10/100/1000Base-T |
| Fiber transmission distance | 10 km with SC single-mode fiber |
| Recommended copper cable distance | CAT5e up to 100 m |
| Power supply | DC 5 V, 1 A |
| Power consumption | No more than 1.6 W |
| DIP switch 1 | LFP link-fault alarm: on/off |
| DIP switch 2 | Storm suppression: on/off |
| DIP switch 3 | Force optical port to 100 Mbps: on/off |
| DIP switch 4 | Force Ethernet port to 100 Mbps: on/off |
| Dimensions (W × H × L) | 71.0 × 27.0 × 95.0 mm |
| Net weight | 160 g |
| Operating environment | −30°C to +75°C; 0–80% RH, non-condensing |
| Storage environment | −40°C to +80°C; 0–90% RH, non-condensing |
Link setup and status checks
Match the SC optical connection, fiber type and link partner before installation. The specification identifies single-mode fiber; it does not provide a wavelength or a complete matching-pair configuration, so confirm those details for the intended link.
The Link/Act indicators distinguish a connected port from active data transfer: steady light means the link is connected, flashing means data is being exchanged, and off means the port is not connected normally. Use the rear DIP switches only after confirming the required link speed and fault-alarm behavior.
Frequently asked questions
What fiber connector does the Colorlight OP1 use?
The OP1 V1.1 specification identifies an SC optical connector and single-mode fiber. Confirm the matching optical link partner before installation.
What transmission distance is specified for the OP1?
The listed single-mode fiber distance is 10 km. The recommended CAT5e copper Ethernet distance is up to 100 m.
Which Ethernet speeds does the OP1 support?
The RJ45 port is specified as 10/100/1000Base-T. The optical interface is listed as 1000Base-X, and DIP switches provide forced 100 Mbps modes for the optical and Ethernet ports.
What power supply does the OP1 need?
The specification lists DC 5 V, 1 A, with device power consumption no greater than 1.6 W.
What do the OP1 rear DIP switches control?
They enable or disable link-fault alarm, storm suppression, forced 100 Mbps optical operation and forced 100 Mbps Ethernet operation. Match the settings to the link configuration.
Download Specification:
Colorlight OP1 Fiber Transceiver for LED Control System Specification
| Weight | 1.5 kg |
|---|
Be the first to review “Colorlight OP1 SC Fiber Optic Transceiver | 10 km”
You must be logged in to post a review.
Will I be charged with customs and taxes?
The prices displayed on our site are tax-free (in US Dollars), which means you may be required to pay import duties and taxes once you receive your order. Import taxes, duties, and related customs fees will be determined by your local customs office when your order arrives at its final destination.
Please note that these additional charges and taxes are your responsibility, and we do not take any responsibility for them. We are not liable for paying or reimbursing any customs duties, taxes, or related fees. For more details on these charges, please contact your local customs office.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations..
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound..
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.)..
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item..
Related products
Reviews
There are no reviews yet.