Linsn RV801 LED Receiving Card – Calibration and Screen Control
$ 45.00
Linsn RV801 supports LED screen calibration, grayscale and refresh adjustment, dual-cable backup and built-in test patterns. Loading capacity depends on the specified grayscale, refresh and driver-board configuration.
10000 in stock
Product overview
The Linsn RV801 LED receiving card supports screen configuration, grayscale adjustment, calibration and diagnostic test patterns. Its listed loading capacity depends on the grayscale and refresh settings, so select it using the complete module and cabinet configuration.
Product specifications
| Parameter | Specification |
|---|---|
| Calibration modes | Single point, 2 × 2, 4 × 4 and 8 × 8 points |
| Calibration capacity | Up to 6,144 points per module |
| RGB correction | 256 levels per red, green and blue channel; point and cabinet correction |
| Grayscale adjustment | Up to 65,536 levels |
| Refresh adjustment | 10–3,000 Hz listed; achievable combination depends on screen settings |
| Phase-lock synchronization | 47–76 Hz |
| Conditional full-color load | 512 × 128 pixels at 4,096 grayscale levels and 180 Hz refresh |
| Conditional static full-color load | 160 × 64 pixels at 16,384 grayscale levels and 300 Hz; driver board must support a 30 MHz clock |
| Brightness adjustment | 256 levels |
| Configuration / update | Computer configuration; online program update through LED Studio |
Loading limits and maintenance
The loading examples above are operating combinations from the existing product specification, not independent maxima that can be combined. Match scan mode, driver-board clock, grayscale and refresh to the screen before ordering.
The RV801 provides A/B network ports and supports dual-cable backup with the appropriate system configuration. Listed functions also include intelligent scan identification, synchronized or independent multi-screen operation and built-in display tests for grayscale, red, green, blue and other patterns.
The existing listing reports a measured transmission maximum of 170 m and a stated transmission distance of 140 m, without a cable specification. Treat these as source claims to verify for the actual cable route, rather than an installation guarantee.
Frequently asked questions
1. Can RV801 drive 512 × 128 pixels at any refresh rate?
No. The listed 512 × 128 loading example is tied to full color, 4,096 grayscale levels and 180 Hz refresh. Other combinations require confirmation.
2. Can RV801 test a screen without a sending card?
The receiving card has built-in test patterns, including grayscale and individual red, green and blue tests, listed for use without a sending card.
3. How is RV801 configured or upgraded?
The product lists computer-based configuration without DIP switches and online program updates through LED Studio. Confirm the correct hardware and firmware version before updating.
4. What should I check when replacing an RV801?
Confirm the exact board model and revision, connector layout, module driver and scan mode, cabinet pixels and saved configuration. Do not assume a similarly named RV801-series board is interchangeable.
| Weight | 0.35 kg |
|---|
Be the first to review “Linsn RV801 LED Receiving Card – Calibration and Screen Control”
You must be logged in to post a review.
Will I be charged with customs and taxes?
The prices displayed on our site are tax-free (in US Dollars), which means you may be required to pay import duties and taxes once you receive your order. Import taxes, duties, and related customs fees will be determined by your local customs office when your order arrives at its final destination.
Please note that these additional charges and taxes are your responsibility, and we do not take any responsibility for them. We are not liable for paying or reimbursing any customs duties, taxes, or related fees. For more details on these charges, please contact your local customs office.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations..
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound..
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.)..
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item..
Related products
Reviews
There are no reviews yet.