Mooncell A712 LED receiving card
The Mooncell A712 uses 12 HUB75E interfaces and supports up to 24 groups of parallel data. The original listing specifies a maximum loading capacity of 512×384 pixels.
AutoLED setup and maintenance
Mooncell calibration software supports pixel-level brightness and chroma adjustment. In AutoLED, the network-port test function can display the receiving-card serial number and network-port information on the target cabinet, helping identify card positions and the connection diagram.
AutoLED can also read back stored configuration data and check network-cable error rates. Network-cable hot backup uses a loop arrangement to provide an alternate data path when a cable connection fails.
A712 specifications
| Parameter | Specification |
|---|---|
| Model | A712 |
| Module interfaces | 12 × HUB75E |
| Parallel data groups | Up to 24 |
| Maximum load in original listing | 512×384 pixels |
| Calibration | Pixel-level brightness and chroma using Mooncell calibration software |
| Mapping and identification | AutoLED network-port test; cabinet display of serial number and port information |
| Backup | Ethernet cable hot backup with loop connection |
| Configuration readback | Supported through AutoLED |
| Cable diagnostics | Network-cable error-rate detection through AutoLED |
Confirm the board revision, module driver and scan configuration before applying the maximum loading figure. Keep a copy of the existing cabinet configuration when preparing a replacement.
Product images


Specification downloads
Mooncell A712 Receiver Card Specification
Frequently asked questions
1. How many module interfaces does A712 provide?
It provides 12 HUB75E interfaces and supports up to 24 parallel data groups.
2. What is the listed A712 pixel capacity?
The original product description states up to 512×384 pixels. Confirm the operating conditions in the matching specification.
3. How can I locate an A712 card in a cabinet chain?
The AutoLED network-port test can display the receiving-card serial number and network-port information on the target cabinet.
4. Can AutoLED retrieve settings and diagnose cables?
Yes. The listing describes stored configuration readback and network-cable error-rate detection through AutoLED.


Reviews
There are no reviews yet.