The NovaStar EL2000 video wall splicer combines multiple video sources into a managed display layout. It uses HDMI video outputs and browser-based control. This model is discontinued and is no longer available from this store. Use this page to review its configuration or prepare a replacement request for an existing installation.
Replacing an EL2000 starts with the signal path: source devices, required screen layouts, output connections, and the equipment receiving those outputs. Send those details to EagerLED before choosing another processor. A similar product name does not establish compatibility.
NovaStar EL2000 specifications at a glance
| Item | Published specification |
|---|---|
| Video inputs | Up to 4 channels; mode-dependent |
| 4K input mode | 2 HDMI 1.4 inputs; 3840 × 2160 at 30 Hz is listed |
| Output card | 1 card with 9 HDMI 1.3 outputs |
| Layers | Up to 4 × 2K, 2 × DL, or 1 × 4K layer |
| Presets | Up to 2,000 |
| Control network | Gigabit Ethernet for browser control |
| Rack size | 1.5U |
Source: NovaStar EL2000 Video Wall Splicer Specifications, V1.0.0, September 5, 2023. Download the EL2000 specification PDF for connector modes and supported timings.
Check input modes before matching a source
The 4-input and 2-input modes have different limits. In the 2 × HDMI 1.4 mode, the two HDMI 1.3 input connectors are unavailable. Interlaced input signals are not supported. Check the exact resolution, refresh rate, and active input mode together; the label “4K” alone is insufficient to confirm a source will work.
For a replacement inquiry, include a screenshot of the source output settings and a photo of the existing input connections. If an adapter sits between the source and processor, identify it as well.
HDMI output and Ethernet control serve different roles
The listed output card provides HDMI video connections. The Ethernet port communicates with a control computer or network for web control; it is not a direct LED receiving-card video output. An LED installation therefore needs its downstream sending and receiving equipment checked as part of the complete signal chain.
The EL2000 also provides multi-screen layouts, source cropping, scrolling text, and LCD bezel compensation. Browser control supports multi-user collaboration. Match the functions your installation actually uses when discussing an alternative.
Original EL2000 product image

EL2000 questions
Can I order the NovaStar EL2000 from this store?
No. The EL2000 is marked discontinued and unavailable. Contact EagerLED about an alternative for your project rather than relying on the historical price shown on this listing.
Does an EL2000 replacement need the same number of ports?
Port count is only one part of the comparison. Provide the connector types, source timings, number of simultaneous pictures, screen resolutions, and control requirements so the proposed signal chain can be reviewed.
Which model is a direct replacement?
A direct replacement has not been verified for this listing. Do not assume that another NovaStar processor accepts the same cards, configuration files, or connections. Share your current setup before ordering.
Request an alternative for your installation
Send your EL2000 replacement requirements with photos of the front and rear panels, source devices, screen layout, and downstream controller models. Mention whether you are replacing a failed unit or redesigning the system.
You can also browse the NovaStar product range and LED video processors to identify products to discuss. These categories are starting points for selection, not a compatibility guarantee.



Reviews
There are no reviews yet.