Product overview
The Linsn EX902D is a multifunction board for LED screen brightness, environmental monitoring, audio and power-control functions. The V1.2 manual places it between the sending card and the first receiving card. It supports sensor connections, relay control, timing and cascading.
Product specifications
| Parameter | Specification |
|---|---|
| Model / manual | EX902D; V1.2, January 2018 |
| Signal-chain position | Between sending card and first receiving card |
| Audio | 1 output; 3.5 mm audio output described |
| Environmental sensing | 2 temperature/humidity detection modules for inside/outside cabinet measurement |
| Brightness sensing | Light-sensor connection; automatic adjustment |
| Relay functions | 3 power-control relays; 3 fan-control relays; 3 air-conditioner-control relays |
| Additional functions | Timer/delayer; cascading |
| Supply | 5 V rated; 4.5–5.5 V |
| Rated current / power | 0.40 A / 2.0 W |
| Operating conditions | −20°C to +75°C; 0–95% humidity |
Sensor setup and switching control
Confirm the sensors included with the order. Place environmental and light sensors appropriately for the intended measurement and configure automatic brightness in the compatible LEDSet/LEDStudio software.
The manual shows external solid-state relay and AC-contactor connection examples for power and cooling control. Follow the applicable circuit and load ratings; the board’s low-voltage supply rating is not a mains-load switching rating.
The original page lists 256-level brightness control and smoke detection with an added probe. The linked V1.2 manual does not document the smoke feature in its feature list, so confirm it on the exact board if required.


Frequently asked questions
1. Where is EX902D connected?
The manual places it between the sending card and the first receiving card, typically near the LED screen.
2. How does EX902D carry audio to the display?
The manual describes audio entering the sender’s 3.5 mm jack, travelling over the RJ45 link and leaving the multifunction board through its 3.5 mm audio output.
3. Can EX902D control fans and air conditioners?
Yes. The manual lists relay groups for fan and air-conditioner control and shows external switching arrangements. Match the wiring and load ratings to the equipment.
4. Does EX902D include all sensors or confirmed smoke monitoring?
Package contents are not established by the listing. Smoke monitoring appears in the old page text but is not confirmed by the attached V1.2 feature list; verify the exact board and probe support.





Reviews
There are no reviews yet.