NovaStar A10s Plus LED receiving card
The A10s Plus is a compact receiving card with a listed maximum loading capacity of 512 × 512 pixels. It supports up to 32 groups of parallel data or 64 groups of serial data and uses high-density connectors with an integrated network transformer.
Check the model before configuration: The original download on this listing is an A10s Pro specification, not an A10s Plus document. The table below preserves the A10s Plus product listing’s values. Confirm the supplied card revision and obtain the matching A10s Plus specification before ordering or applying firmware.
Listed A10s Plus parameters
| Maximum Loading Capacity | 512×512 pixels | |
| Input voltage | DC 3.3 V– 5.5 V | |
| Rated current | 0.5 A | |
| Electrical Parameters | Rated power consumption | 2.5 W |
| Operating Environment | Temperature | -20°C–70°C |
| Humidity | 10% RH–90% RH, non-condensing | |
| Storage Environment | Temperature | -25°C–125°C |
| Humidity | 10% RH–90% RH, non-condensing | |
| Packing Information | Packing specifications | An antistatic bag and anti-collision foam are provided for each receiving card. Each packing box contains 40 receiving cards. |
| Packing box dimensions | 378.0 mm × 190.0 mm × 120.0 mm | |
| Dimensions | 80.0 mm × 45.0 mm ×7.3 mm | |
| Net Weight | 22.3 g | |
| Certifications | RoHS, EMC Class B | |
Image control and software requirements
The original listing specifies scanning up to 1/64. With NovaLCT V5.2.0 or later, it lists random-order module scanning, data-row and channel extraction, precise grayscale correction, separate RGB Gamma adjustment and bit-error detection.
Other listed image functions include HDR, low latency, 18Bit+, ClearView, quick seam correction, 3D, 90° rotation and rotation at any angle. Confirm the controller, driver IC and firmware requirements for the supplied A10s Plus revision. Do not use the A10s Pro PDF to infer compatibility.
Cabinet integration and maintenance
The compact board saves cabinet space, and its high-density connector design helps limit dust and vibration effects. The listed maintenance functions include automatic module calibration, cabinet mapping, pre-stored images, module Flash management, card voltage and temperature monitoring without peripherals, and a cabinet LCD.
LVDS transmission and smart-module functions require dedicated firmware. Match the HUB-board pinout and save the existing cabinet configuration before replacement work.
Frequently asked questions
Is A10s Plus the same model as A10s Pro?
They have different model names. This product is listed as A10s Plus, while its existing PDF names A10s Pro. Confirm the exact hardware and matching documentation rather than assuming interchangeability.
What loading capacity and data output are listed for A10s Plus?
The listing states 512 × 512 pixels, with up to 32 groups of parallel data or 64 groups of serial data.
What voltage does the A10s Plus listing specify?
The original parameter table lists DC 3.3–5.5 V, rated current of 0.5 A and rated power consumption of 2.5 W. Verify the supplied hardware revision before connection.
Do LVDS and smart-module functions need special firmware?
Yes. The original feature list explicitly requires dedicated firmware for both. Request the file approved for the exact A10s Plus revision.
Which NovaLCT version is listed for the advanced scanning functions?
NovaLCT V5.2.0 or later is listed for random-order scanning, data-row/channel extraction, precise grayscale correction, separate RGB Gamma adjustment and bit-error detection.
Product images


Existing specification download
Download the existing A10s Pro specification V1.1.2 (PDF). This file identifies A10s Pro; request the matching A10s Plus document for this listing.




Reviews
There are no reviews yet.