Colorlight Z5 professional LED video controller
The Colorlight Z5 combines Ultra HD video processing and LED display control for live events, broadcast, television and filming. It accepts full 4K sources through HDMI 2.0, DisplayPort 1.2 and 12G-SDI, and supports HDR10/HLG and Genlock for installations that require controlled timing and color reproduction.
Z5 offers up to 13.1 million pixels of loading capacity. Its output options include 20 Gigabit Ethernet ports and two 10 Gigabit fiber ports, with Ethernet-port and controller redundancy support.
Technical specifications
| Parameter | Specification |
|---|---|
| Video input types | HDMI 2.0, DP 1.2, 12G-SDI |
| Maximum single-port input | 4096 × 2160 at 60 Hz |
| Input bit depth | 8-bit / 10-bit |
| Input frame-rate range | 23.98–240 Hz |
| Maximum LED load | 13.1 million pixels |
| Maximum width / height | 16,384 / 8,192 pixels; total loading limit applies |
| Output options | 20 × Gigabit Ethernet; 2 × 10 Gigabit fiber |
| Output frame-rate range | 23.98–240 Hz |
| Multi-screen display | Up to three screens |
| HDR formats | HDR10 / HLG |
| Synchronization | Genlock |
| Redundancy | Ethernet port redundancy and controller redundancy |
| Control interfaces | USB for control and cascading; RS232; LAN for TCP/IP control |
| HDCP support | HDCP 1.4 / 1.3 / 2.3, as listed in Specification V2.0 |
Video processing and color adjustment
- Crop, switch and scale video sources for the LED display.
- Use multi-screen display and single-layer crossfades.
- Adjust hue, saturation, contrast and brightness compensation.
- Control brightness by network-port group and adjust color temperature with independent RGB controls.
- Support 3× and 4× virtual-pixel modes.
- Use a multifunction card for automatic brightness control.
Low-latency operation
Specification V2.0 lists a one-frame minimum under low latency and a zero-frame minimum under lag-free processing. It does not explain the operating conditions for these two statements in that feature list. Confirm the required processing mode, firmware and complete signal chain before relying on a particular latency figure.
Frequently asked questions
Which 4K video sources can the Colorlight Z5 accept?
Z5 supports HDMI 2.0, DisplayPort 1.2 and 12G-SDI input types. A single port supports up to 4096 × 2160 at 60 Hz, with 8-bit and 10-bit video input supported.
What is the Z5 maximum loading capacity?
The listed maximum is 13.1 million pixels, with a maximum width of 16,384 pixels or height of 8,192 pixels. These width and height limits do not override the total pixel capacity.
Does Z5 support HDR and Genlock?
Yes. HDR10, HLG and Genlock are listed features. Match the source signal and screen configuration to the required workflow before commissioning.
Can Z5 use fiber output instead of Ethernet output?
Z5 lists 20 Gigabit Ethernet outputs and two 10 Gigabit fiber outputs as output options. Select the transmission arrangement for the receiver system and installation.
What redundancy options are available on Z5?
Z5 supports Ethernet-port redundancy and controller redundancy. Plan and configure the backup connections for the chosen screen layout.
Product image and specification download

Download specification: Colorlight Z5 LED Display Video Controller Specification



Reviews
There are no reviews yet.