Huidu HD-RB6 receiving card for compact LED cabinets
The HD-RB6 is a compact receiving card for synchronous and asynchronous LED control systems. Its two high-density connectors make it suitable for adapter-board designs in thin cabinets, transparent screens and light-strip film displays.
HD-RB6 technical specifications
Specifications below follow the linked V0.1 document. Maximum and recommended pixel loads are separate limits.
| Maximum loading capacity | 131,072 pixels (256 × 512) |
|---|---|
| Recommended loading capacity | 98,304 pixels (256 × 384) |
| Parallel data | Up to 32 RGB groups |
| Serial data | 64 groups for transparent screens, expandable to 128; 96 groups for light-strip film screens |
| Scan mode | Static to 1/128 scan |
| Module IC support | Common ICs and most PWM ICs; confirm the actual driver IC |
| Communication | Gigabit Ethernet; Super Cat5 / Cat6 cable within 80 m |
| Display interfaces | Two 84-pin connectors |
| Input voltage / power | DC 3.8–5.5 V / 2.5 W |
| Grayscale | 256–65,536 |
| Operating temperature | −40°C to 80°C |
| Operating / storage humidity | 0–90% RH |
| Net weight | Approximately 15 g |
Configuration and installation
Check the driver IC, scan mode, data-group arrangement and adapter pinout before configuring the screen. The card includes smart settings, flexible receiving-card arrangement and built-in display tests for brightness uniformity and module flatness. The RUN indicator flashes once per second during normal operation, while LAN activity flashes rapidly when communication is working.

HD-RB6 frequently asked questions
What is the maximum HD-RB6 loading capacity?
The specification lists 131,072 pixels (256 × 512) as the maximum and recommends 98,304 pixels (256 × 384). Use the recommended value when planning, then verify the module configuration and required display performance.
Can RB6 work in synchronous and asynchronous systems?
Yes. The document lists dual-mode sending boxes, asynchronous sending cards, synchronous sending cards and VP-series video processors. Check the exact sending device and system configuration before installation.
Is RB6 suitable for transparent or film LED screens?
The card is intended for applications including transparent, light-bar and film screens. It supports up to 32 RGB parallel groups, 64 serial groups for transparent screens with expansion to 128, and 96 groups for light-strip film screens. The expansion arrangement must match the adapter board and pinout.
Does the RB6 have HUB75 connectors?
The specification identifies two 84-pin high-density connectors, JH1 and JH2, for a display adapter board or unit board. Select the adapter using the PDF pin definitions rather than assuming a direct HUB75 connection.
What power supply does the HD-RB6 require?
Use a DC supply within 3.8–5.5 V; the listed card power is 2.5 W. Disconnect power before wiring or changing connections.


Reviews
There are no reviews yet.