NovaStar TB3 LED multimedia player — legacy reference
The TB3 is listed as no longer in production. EagerLED recommends reviewing the NovaStar TB30 as an alternative. Confirm compatibility and the supplied revision before replacing a working system.
The NovaStar TB3 is a Taurus multimedia player for small and medium-sized full-color LED displays, with up to 650,000 pixels of loading capacity. This page retains its original specification and video for owners checking an existing installation.
TB3 reference specifications
| LED loading capacity | Up to 650,000 pixels |
|---|---|
| Processor | Eight-core 1.5 GHz |
| Memory / storage | 2 GB operating memory / 8 GB internal storage |
| Video decoding | H.265 4K and 1080p hardware decoding |
| Local networking | Wired Ethernet; Wi-Fi AP and station modes |
| Cellular access | Optional 4G module matched to the destination network |
| Multi-screen playback | Synchronization supported; timing-module selection requires a project check |
| Backup | Network and Ethernet-port redundancy |
The media-decoding resolution does not change the LED loading limit. Calculate the screen’s native pixel count and check its receiving-card configuration separately.
Content publishing and connected displays
The original TB3 description supports publishing and screen control through PCs, phones and a LAN, plus remote centralized publishing and monitoring. Its commercial applications include retail signs, chain-store displays, advertising screens and displays that do not need a continuous PC video source.
For multiple screens showing the same program, coordinate playback time and content. The original guidance recommends a time-synchronization module when synchronization requirements are high. Select a compatible regional 4G module separately if cellular networking is required.
Replacing a TB3
Record the current screen resolution, cabinet wiring, receiving-card models and network method before removing the old player. Keep a copy of the working configuration and sample content. These details allow the proposed replacement to be checked against the installation.
The TB30 alternative has revision-dependent specifications. Do not assume that model names alone establish identical ports, accessories, loading or software behavior. Ask for the configuration and revision to be identified in the quotation.
Original TB series video
TB3 frequently asked questions
Is the NovaStar TB3 still in production?
The existing EagerLED listing states that production has ended. Contact EagerLED to discuss the recommended TB30 alternative and any requirements specific to your current screen.
Can I use the TB30 as a direct replacement?
The TB30 is the alternative recommended on this page, but replacement compatibility still needs checking. Provide the old player’s label, receiving-card configuration, screen map and network requirements.
Does the TB3 need an optional module for 4G?
Yes. The original instructions require a separately purchased 4G module selected for the country or region. Confirm the installed module when troubleshooting an existing unit.
Does its 4K decoding support a full 4K LED canvas?
No. The TB3 LED load is up to 650,000 pixels. A source-video decoding specification is not the output screen capacity.
Where can I find the original TB3 specification?
The V1.0.0 PDF below is retained for reference. Match it to the hardware and firmware of the existing unit before using its connection or configuration information.












Reviews
There are no reviews yet.