NovaStar VX600S LED video controller: confirm the model
This listing is titled NovaStar VX600S, but its original product-image files are labeled VX6S and its download filenames refer to VX600 and VX6s. These references do not establish that the models are interchangeable. Before ordering, send EagerLED the front-panel model label, rear-panel photo and firmware version so the supplied controller and its matching documentation can be confirmed.
Original interface and parameter reference
The table below preserves the values supplied with this listing. Because the model references conflict, treat them as information to check against the actual unit, not as a verified VX600S specification. In particular, do not use the listed temperature range or OSD function as a project requirement until the matching manufacturer document is confirmed.
| Item | Value supplied in the original listing |
|---|---|
| Video source selection | 7 sources: 2 × 3G-SDI, 2 × HDMI 1.3, 2 × DVI and 1 USB playback source |
| 3G-SDI inputs | 2; up to 1920 × 1080 at 60 Hz |
| HDMI / DVI inputs | 2 of each; up to 1920 × 1200 at 60 Hz; HDCP support listed |
| USB playback connectors | 2; flash-drive media playback and mouse connection |
| U-AUDIO | 2 audio output interfaces |
| LED outputs | 6 Ethernet outputs |
| Monitoring output | 1 DVI; preview or PGM monitoring listed |
| Control connections | 1 Ethernet port for PC/network communication; USB Type-B for PC control/cascade input and USB Type-A for cascade output (USB quantities were not specified) |
| Maximum video output width | 4096 pixels; total loading capacity was not specified |
| Windows / OSD | 3 windows and 1 OSD channel were listed; confirm firmware and document revision before relying on OSD |
| User presets | 16 |
| Power input | AC 100–240 V, 50/60 Hz |
| Operating temperature | Original listing: −20°C to +60°C; unverified for the supplied unit |
| Chassis | 1U standard chassis; exact dimensions were not supplied |
Switching, scaling and commissioning
The original feature list describes direct screen configuration, input-resolution adjustment, input-source backup, screen brightness adjustment, full-screen scaling and linking multiple controllers. It also describes a switcher mode with a TAKE button, PGM monitoring, HDMI/DVI synchronization and an OLED front-panel display. Confirm these functions against the exact hardware and firmware revision during the configuration check.
Document revision matters: NovaStar’s VX6s Specifications V1.3.1 records removal of the OSD function in V1.2.0 and lists an operating range of 0°C to +45°C. That document is for VX6s, not proof of the identity of this VX600S listing. The different values must be resolved against the supplied unit rather than combined into one specification.
Controller selection questions
Are VX600S, VX600 and VX6s the same controller?
The original listing contains all three names across its title, image filenames and downloads. Do not assume equivalence. Ask EagerLED to confirm the exact model label and provide matching documentation before ordering a replacement.
Can I calculate loading capacity from the six Ethernet outputs?
The original listing gives six outputs and a maximum width of 4096 pixels, but no confirmed total pixel capacity for VX600S. Send the LED screen pixel width and height, receiving-card model and cabinet wiring layout for a model-specific check.
Does this controller support USB playback and live video inputs?
The original listing describes USB media playback plus HDMI, DVI and 3G-SDI input connections. Confirm the port layout, source timing and supported media formats on the exact unit; the conflicting download names are insufficient to verify compatibility.
Is the OSD function available on every version?
Do not assume so. The original listing mentions one OSD channel, while the VX6s manufacturer revision history records its removal. Check the model, firmware and matching manual before planning an OSD workflow.
What should I provide for a replacement or quotation?
Provide clear front and rear photos, the model and firmware shown on the unit, LED screen resolution, receiving-card model, input connections and timing, and any required switching or backup functions.
Original specification and manual downloads
The original links are retained below. Their filenames name different models, and they could not be retrieved during this review. Contact EagerLED for the matching document before using either reference for installation.





Reviews
There are no reviews yet.