NovaStar Armor A5s Plus LED receiving card
The A5s Plus is a compact receiving card for LED display cabinets. It supports up to 512 × 384 pixels per card with NovaLCT V5.3.1 or later. High-density connectors carry the data connections, while reserved pins provide provision for custom functions.
Technical parameters
| Model | NovaStar Armor A5s Plus |
|---|---|
| Maximum listed loading | 512 × 384 pixels per card |
| Software condition for this loading | NovaLCT V5.3.1 or later |
| Parallel RGB data | Up to 32 groups |
| Serial data | 64 groups, expandable to 128 groups |
| Connections | High-density connectors; reserved pins for custom functions |
| Image functions | Color management, 18Bit+, pixel-level brightness and chroma calibration, individual RGB Gamma adjustment and 3D |
| EMC design | EMC Class B compliant hardware design |
Planning the cabinet configuration
The connector design helps limit the effects of dust and vibration on the connection. When choosing a card for an existing cabinet, confirm the connector pinout, module driver and configuration file, as well as the pixel dimensions. Parallel and serial output counts describe different arrangements; the 128-group serial option requires the relevant expansion configuration.
Color management, calibration and RGB Gamma adjustment provide separate controls for image setup. Confirm the firmware and sending-device support for the functions required by your display, including 3D.
Frequently asked questions
How many pixels can one A5s Plus load?
The listed maximum is 512 × 384 pixels. NovaLCT V5.3.1 or later is required for this loading capacity.
How many data groups does A5s Plus support?
It supports up to 32 groups of parallel RGB data or 64 groups of serial data. Serial output is expandable to 128 groups with the appropriate configuration.
Does A5s Plus use standard HUB75E connectors?
The listed interface is a high-density connector system. Confirm the matching HUB board and pinout for your cabinet rather than assuming a direct HUB75E connection.
Does A5s Plus support color calibration and 3D?
Yes. The listed functions include pixel-level brightness and chroma calibration, color management, 18Bit+, individual RGB Gamma adjustment and 3D. Check the complete hardware and firmware configuration for the intended mode.
What information is needed to replace an A5s Plus card?
Provide the card label and revision, module and HUB-board details, cabinet pixel dimensions and saved configuration file. These identify the configuration needed for the replacement.
Product images








Reviews
There are no reviews yet.