Colorlight Z6 is an all-in-one 4K LED video controller that combines video splicing, image processing and LED sending. The Z6 Super Controller supports up to 8.30 million pixels, 16 Gigabit Ethernet outputs and up to three display windows. It is designed for rental LED walls and high-resolution display installations.
For a suitable configuration, match the controller to your LED wall’s actual pixel dimensions, source connections and Colorlight receiving cards. This page covers the Z6 model; Z6 Pro specifications should not be used to configure this unit.
Specifications | Screen planning | FAQs | Request a quote

Colorlight Z6 specifications and connections
The manufacturer’s published Z6 specifications list an 8.30-million-pixel loading capacity. Maximum width and height are separate limits: the screen must also fit within the total pixel capacity and the supported port mapping.
| Parameter | Specification |
|---|---|
| Model | Colorlight Z6 LED video controller / Z6 Super Controller |
| Loading capacity | Up to 8.30 million pixels |
| Maximum screen dimensions | Up to 8,192 pixels wide or 4,096 pixels high; total pixel capacity still applies |
| 4K source connections | 1 × HDMI 2.0 and 1 × DisplayPort 1.2 |
| Additional video inputs | 4 × DVI and 2 × 3G-SDI |
| UHD input | Supports 3840 × 2160 at 60 Hz; confirm the exact source timing and color format for your configuration |
| LED data outputs | 16 × Neutrik Gigabit Ethernet outputs |
| Image layout | Up to three windows, with cropping, scaling and splicing |
| HDR processing | HDR10 through HDMI 2.0; DP, DVI and SDI do not support HDR display |
| Synchronization | Genlock input and loop for synchronized multi-controller systems |
| Power | AC 100–240 V, 50/60 Hz; rated 70 W |
| Dimensions (W × H × D) | 482.6 × 88.0 × 372.6 mm |
| Net weight | 9 kg |
| Operating conditions | −20 to 60°C; 0–80% RH, non-condensing |
Specification basis: The linked Colorlight Z6 specification V2.2. Before ordering, confirm the supplied hardware revision, firmware and connection requirements with EagerLED. Input resolution, LED loading capacity and panel refresh rate describe different parts of the system.
Video processing for rental and fixed LED walls
The integrated processor lets an operator crop a source, scale it to the display area and arrange multiple windows. This can suit a stage wall showing a presentation alongside a live camera feed, provided the source formats and layout fit the controller’s supported configuration.
Genlock supports synchronization when multiple controllers share a suitable reference signal. Low-latency operation is a system configuration question: the source, processing settings, receiving cards and LED panels all affect the displayed result. Confirm the required operating mode before specifying a latency-sensitive installation.
The front-panel LCD and adjustment knob provide access to operating menus and system information. Controls include brightness adjustment, screen blackout and freeze functions. Check the panel labels and operating instructions for the supplied revision before preparing an operator workflow.
Will the Z6 fit your LED screen?
Start with the wall’s pixel resolution, then check the total load, maximum dimensions and cable allocation. Physical screen size alone does not determine controller capacity.
- Calculate the pixel load. Multiply the full screen width in pixels by its height in pixels.
- Check all limits together. A layout below 8.30 million pixels still needs to satisfy width, height and output-port constraints.
- Map cabinets to outputs. Share the cabinet resolution, receiving-card model, cable routing and backup requirements for a configuration check.
- Confirm the video source. State the connector, resolution, frame rate, color format and HDR requirement. A 4K label alone is insufficient.
Planning example: a 3,840 × 1,080 LED canvas contains 4,147,200 pixels. That is below the published total capacity, but it is not a complete compatibility approval. Cabinet mapping, receiving-card limits and source timing must also be checked.
For an existing installation, send a cabinet wiring diagram and the current configuration file. If you are building a new system, review our LED receiving cards and ask us to confirm the exact Colorlight combination. Do not assume a receiving card from another control ecosystem is interchangeable.
Colorlight Z6 FAQs
Is Colorlight Z6 the same as Z6 Pro?
No. They are different models. Z6 has 16 Gigabit Ethernet outputs; the Z6 Pro uses a different modular input and fiber-output arrangement. Match the model on the controller label, quotation and specification.
Which Z6 input supports HDR10?
The V2.2 specification supports HDR10 through HDMI 2.0. DP, DVI and SDI do not support HDR display. Confirm source timing, bit depth and color sampling.
How many windows can Colorlight Z6 display?
It supports up to three windows with adjustable size and position. The minimum window size is 64 × 64 pixels, and the total display layout must fit the loading limits.
Can Z6 play scheduled files without a video source?
The linked specification describes a video processor and sending controller. It does not document standalone media scheduling or cloud playback. Use an appropriate video source for the planned display.
What should I check before replacing a Z6 controller?
Save the existing screen mapping and check the model, firmware, cabinet resolution, receiving cards, video-source formats and backup configuration. The maximum width, height and total pixel load all apply.
Specifications download and ordering terms
Download the Colorlight Z6 LED Video Controller Specification. Confirm the document revision against the unit being supplied.
- Delivery: the listed dispatch time is within eight working days after payment. Confirm availability and the project schedule before ordering.
- Warranty: the product’s listed warranty is two years.
- Payment and packaging: PayPal and credit card are preferred; packaging is a strong cardboard carton.
- Shipping: DHL Express is the default method. Alternative courier, air or sea arrangements can be discussed for the destination.
- Support scope: full technical support is provided when both the LED modules or display and the controller system are ordered from our company.
Get a Colorlight Z6 configuration check
Send EagerLED your LED wall resolution, cabinet layout, receiving-card model, video sources, backup requirements and delivery country. These details help us check the controller configuration and prepare a relevant quotation.
Request a Colorlight Z6 quote. For purchase steps, see how to buy.


Reviews
There are no reviews yet.